I. Thickened Insulation Method: Add insulation cotton to the roof of the steel structure plant. The insulation cotton commonly used on the roof is glass wool, with common thicknesses of 50mm, 75mm, and 100mm, and a density of 10kg/m3. The insulation cotton board can insulate most of the solar radiation and conductive heat, reducing the greenhouse effect inside the room. This greatly reduces the temperature of the plant and improves the internal temperature of the steel structure plant. The color steel plate steel structure roof with added insulation cotton has the effect of being warm in winter and cool in summer.

 

　　II. Installation of ventilation facilities: Since some machines in steel structure plants generate heat and water vapor, if these hot air and water vapor are not discharged in time, they will accumulate in the plant, increasing the temperature of the steel structure plant and affecting the environment. The solution is to ensure reasonable ventilation in the plant and install an appropriate amount of ventilation system. Reasonable exhaust system installation will significantly improve the air environment of the steel structure plant and greatly reduce the temperature. Methods include:

 

　　1. Install a passive ventilator on the roof of the steel structure plant: A passive ventilator is a ventilation device that relies on the principle of air convection. When there is a difference in the air environment inside and outside the room, air flow will be generated, thus removing waste gas and hot air from the room. Its advantages are that it does not require additional electricity and is more environmentally friendly. However, it is highly dependent on the environment and cannot forcibly exhaust air. Products mainly include turbine ventilators, strip ventilators (skylight ventilation), and ridge ventilators. (This method is economical and environmentally friendly)

 

　　2. Install a forced exhaust fan on the roof of the steel structure plant: A power fan is a ventilation device driven by electricity. It has good exhaust effect and can adapt to any environment ventilation.

 

　　3. Install an air cooler on the roof of the steel structure plant: An air cooler cools the air using the principle of water cooling, and a strong exhaust fan sends the cold air to the machines indoors. It can keep the indoor temperature of the steel structure plant at a comfortable temperature of 26-30℃. Its power consumption is equivalent to 1/8 of an air conditioner. The cost is 1/2 of an air conditioner, which is a good method for forced cooling of the plant.

 

　　III. Spraying high-efficiency heat-insulating reflective coating: Spray a high-efficiency heat-insulating reflective coating on the roof color steel plate. This product has excellent heat insulation and heat preservation performance. It can reflect 99.5% infrared rays, 92.5% visible light, and has a maximum sound insulation effect of 68%, with an average sound insulation effect of more than 50%. Fireproof grade A, completely non-combustible. Non-toxic and safe, long-lasting and durable. Using this method, construction is convenient, does not damage the original roof, and can prevent roof aging. The maximum temperature difference between the surface temperature of the board material before and after construction can reach 20℃, and the indoor temperature difference can reach 8-10℃. The energy consumption of the steel structure plant can be reduced by 30-70%.

 

　　Maintaining ventilation and cooling in steel structure plants is a respect for the safety of workers and a manifestation of the company's care for its employees. When dealing with ventilation and cooling issues in the plant, consult Shenyang Century Weiye Steel Structure Co., Ltd. ，400-005-1119，because professional quality is guaranteed.